Radha Laminates & Plywood , Gandhinagar / Kolhapur
Contact : +91 9158737111
PVC Routed Doors / Moulded Doors Made in Kolhapur ( Maharashtra )
Door Skins for Flush Doors .
These designs can also be used for ready lamination doors .
Flush doors
Many modern doors, including most interior doors, are flush doors:
- Stiles and rails - As above, but usually smaller. They form the outside edges of the door.
- Core material: Material within the door used simply to fill space, provide rigidity and reduce druminess.
- Hollow-core - Often consists of a lattice or honeycomb made of corrugated cardboard, or thin wooden slats. Can also be built with staggered wooden blocks. Hollow-core flush doors are commonly used as interior doors.
- Lock block - A solid block of wood mounted within a hollow-core flush door near the bolt to provide a solid and stable location for mounting the door's hardware.
- Stave-core - Consists of wooden slats stacked upon one another in a manner similar to a plank & batten door (though the slats are usually thinner) or the wooden-block hollow-core (except that the space is entirely filled).
- Solid-core - Can consist of low-density particle board or foam used to completely fill the space within the door. Solid-core flush doors (especially foam-core ones) are commonly used as exterior doors because they provide more insulation and strength.
- Hollow-core - Often consists of a lattice or honeycomb made of corrugated cardboard, or thin wooden slats. Can also be built with staggered wooden blocks. Hollow-core flush doors are commonly used as interior doors.
- Skin - The front and back faces of the door are then covered with wood veneer, thin plywood, sheet metal, fiberglass, or vinyl. The wooden materials are usually layered with the grain alternating direction between layers to prevent warping. Fiberglass and metal-faced doors are sometimes given a layer of cellulose so that they may be stained to look like real wood.
Moulded doors
- Stiles and rails - As above, but usually smaller. They form the outside edges of the door.
- Core material: Material within the door used simply to fill space, provide rigidity and reduce druminess.
- Hollow-core - Often consists of a lattice or honeycomb made of corrugated cardboard, or thin wooden slats. Can also be built with staggered wooden blocks. Hollow-core flush doors are commonly used as interior doors.
- Lock block - A solid block of wood mounted within a hollow-core flush door near the bolt to provide a solid and stable location for mounting the door's hardware.
- Stave-core - Consists of wooden slats stacked upon one another in a manner similar to a plank & batten door (though the slats are usually thinner) or the wooden-block hollow-core (except that the space is entirely filled).
- Solid-core - Can consist of low-density particle board or foam used to completely fill the space within the door. Solid-core flush doors (especially foam-core ones) are commonly used as exterior doors because they provide more insulation and strength.
- Hollow-core - Often consists of a lattice or honeycomb made of corrugated cardboard, or thin wooden slats. Can also be built with staggered wooden blocks. Hollow-core flush doors are commonly used as interior doors.
- Skin - The front and back faces of the door are covered with HDF / MDF skins.
